Kamis, 10 Agustus 2017

KONFIGURASI DUA ROUTER

Written by   on   with Tidak ada komentar


ROUTER 1

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 192.168.10.6 255.255.255.240
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router con0 is now available

Press RETURN to get started.

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 10.10.10.13 255.255.255.240
% 10.10.10.0 overlaps with FastEthernet0/0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
Router(config)#
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console

Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 192.168.10.6 255.255.255.240
Router(config-if)#no shut
Router(config-if)#
Router(config-if)#ip route 20.20.20.0 255.255.255.240 192.168.10.5
Router(config)#no shut
^
% Invalid input detected at '^' marker.
Router(config)#ip route 20.20.20.0 255.255.255.240 192.168.10.5
Router(config)#

Router con0 is now available
Press RETURN to get started.

ROUTER 2

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 20.20.20.13 255.255.255.240
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up


Router con0 is now available

Press RETURN to get started.

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 192.168.10.5 255.255.255.240
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up


Router con0 is now available


Press RETURN to get started.


Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 20.20.20.13 255.255.255.240
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#


Router con0 is now available

Press RETURN to get started.

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 10.10.10.0 255.255.255.240 192.168.10.6
Router(config)#

Router con0 is now available

Press RETURN to get started.

Gambar konfigurasi router pertama




router kedua


hasilnya
Share:

0 komentar:

Posting Komentar